Wednesday 7 November 2018

Cluster background stamping

Hello Friends and welcome to Heartfelt Wednesday.

Today I have a clean and simple card to share with you all.

I have used the cluster stamping technique to create the background for this card.
This is a great technique to get more use out of your sentiment stamps and it also creates an interesting background without drawing the attention from the focal image.
Read till the end for the full supply list and the instructions for this card.
20180703_155739

20180703_155744

Heartfelt Creations Products:
HCPC-3843 Special Birthday Sentiments Cling Stamp Set

HCPC-3844 For My Friend Sentiments Cling Stamp Set
HCPC-3845 Just For You Sentiments Cling Stamp Set
HCPC-3846 Thank You Sentiments Cling Stamp Set
HCPC-3847 Celebrate Love Sentiments Cling Stamp Set
HCPC-3848 Cheerful Note Sentiments Cling Stamp Set
HCD1-7201 Ticket and Tags Die
HCD1-7203 Ornamental Tags Die
HCPP3-452 12 x 12 Cardstock Pack of 25 - White

RACP468 Ranger Archival Ink Pad - Jet Black
359848 Spellbinders Tool N' One
RAHT Heat It Craft Tool
D120601 Darice Adhesive Foam Strips
3D1844 3-D Crystal Lacquer

NU650 Nuvo Crystal Drops - Ebony Black

Other Products:
Black Versafine Ink or Versamark InkSalty Ocean Distress Oxide ink, Ranger Black embossing powder, iCraft Stencil, Clarity Stencil brushes, MISTI, MS Scoreboard, Red marker, Black cardstock and Green Twine.


Instructions:
Take a 5" x 7" White cardbase and score the front horizontally to create textured background as shown.


Take birthday sentiments stamps from Special Birthday Sentiments Cling Stamp Set,  For My Friend Sentiments Cling Stamp Set, Just For You Sentiments Cling Stamp Set, Thank You Sentiments Cling Stamp Set, Celebrate Love Sentiments Cling Stamp Set and Cheerful Note Sentiments Cling Stamp Set and arrange them diagonally on the MISTI door. Stamp it with Black Versafine Ink or Versamark Ink on a piece of black cardstock and heat emboss it using Ranger Black embossing powder and Heat It Craft Tool. Trim this piece to 4 1/4" x 5 1/2". Die cut 2 pieces of black cardstock using the die from Ornamental Tags Die and adhere it at the top and bottom of the stamped piece we just created so that the total height reaches 7". Adhere it on the scored card front as shown using Darice Adhesive Foam Strips..


Stamp the sentiment from Special Birthday Sentiments Cling Stamp Set on a piece of white cardstock and die cut it using the tag dies from Ticket and Tags Die. Ink it with Salty Ocean Distress Oxide ink using  Clarity Stencil brushes. Die cuat a piece of black cardstock using the larger tag die from the same set and create the tag using all the pieces. Thread few pieces of green twine through the tag hole and adhere it to the card front using Darice Adhesive Foam Strips. Color in the tiny heart on the tag using red marker and cover it with 3-D Crystal Lacquer. Add drops of Ebony Black Nuvo Crystal Drops on the die cut to add finishing touch.



Hope you like it...

Thank you for visiting today... :)
Nupur
Disclosure : Compensated affiliate links used when possible  at NO additional cost to you.. Thank you! 

Friday 2 November 2018

Partial Diecut Card Front

Hello Friends and welcome to Heartfelt Wednesday.

Today I am sharing a black and white card with you all which has partial lacy card front.
The lace part was made using the Eyelet Lace Frames Die

Read till the end for the full supply list and the instructions for this card.
Partial Diecut card Front 1
Partial Diecut card Front pinterest

Partial Diecut card Front 2


Heartfelt Creations Products:
HCPC-3841 Oakberry Lane Antics Cling Stamp Set
HCD1-7199 Oakberry Lane Antics Die
HCD2-7192 Eyelet Lace Frames Die
RACP468 Ranger Archival Ink Pad - Jet Black
HCPP1-438-1 Paper Pack of 10 - Black
HCPP3-452 12 x 12 Cardstock Pack of 25 - White
NU650 Nuvo Crystal Drops - Ebony Black
173842 Scor-Pal Measuring & Scoring Board
D110305 Stamp Mat Pad
359848 Spellbinders Tool N' One
411231 5pc. Acrylic Block Set
532423-KIT Sizzix Vagabond 2 With Solo Wafer-Thin Die Adapter

Other Products:
Black Pencil color, Cuttlebug Embossing Folder - Charles.

Instructions:
Emboss a piece of  4"x 4" white cardstock using Charles Embossing Folder. Adhere it to a slightly bigger piece of black cardstock. Adhere it to a 5" x 7" top folding white cardbase aligning it next to the fold so that it has a uniform border on 3 sides.

Stamp the image from Oakberry Lane Antics Cling Stamp Set using Black Archival Ink on a piece of white cardstock. Color it using black pencil color. Die cut it using matching die from Oakberry Lane Antics Die. Die cut one more piece of white cardstock using the same die. Place the die cut image on the edge of embossed area of the card front and trace the edge of the leaves on the far ends. Cut the card front slightly inside the traced edge. Adhere the diecut image on top of the trimmed edge.

Die cut a piece of black cardstock using Eyelet Lace Frames Die and then cut it into half horizontally. Adhere it behind the floral image and adhere the extra die cut of the same image behind the Eyelet Lace Frames die cut to hide the raw edges and add strength to the card front. Add Ebony Black Nuvo Crystal Drops to the flower center and the .Eyelet Lace Frames die cut to add finishing touch.


Hope you like it...

Thank you for visiting today... :)
Nupur
Disclosure : Compensated affiliate links used when possible  at NO additional cost to you.. Thank you! 

Thursday 1 November 2018

Cards with Craft Treat Stencils


Hello everyone... 
First of all I would like to thank Priya for giving me the opportunity to be a guest designer today for Craft Treat Blog...
I had a lot of fun playing with Craft Treat stencils...I have made a few cards using these stencils

Lets start with the Ganesha card...
20181004_154137
I used the Mandala 2 stencil and inked a piece of white cardstock using Fossiled Amber, Picked raspberry and Spiced Marmalade Distress Oxide inks. I used the left over ink on the dauber to apply a light layer of ink on the whole background after removing the stencil. Then I placed the Musical Ganesha 1 stencil on the inked background and applied black texture paste using a pallet knife. Once the texture paste was dry I trimmed the cardstock and matted it over a slightly bigger piece of black cardstock with a die cut edge on the bottom. I took a 5" x 7" white card base and adhered a smaller piece of black cardstock on top. Then I layered a dry embossed piece of white cardstock on the black cardstock. I used foam adhesive to adhere the Ganesha panel on this to give it dimension.
20181004_154156
20181004_154222
For my second card I used the Tribal Potters stencil along with a black gel pen.
20181004_154515
I placed the stencil on a piece of white cardstock and used a gel pen to trace along the openings. I shifted the stencil a little to trace all the 3 tribal ladies. Then I used the same gel pen to draw lines and patterns to fill in the traced areas. I filled their dresses and pots with different designs and filled in the face, hands and legs with solid black. Then I layered it on black cardstock to create black border on both sides. For the red border I used Dream Catcher stencil and inked it with candied apple and aged mahogany distress ink to get the ombre effect. I used black and red nuvo drops to add add finishing touch to the card.
20181004_154543
For my third card I have used Dream Catcher stencil to create a shaker card.
20181004_153948
I created the background using Folk Art Background along with peeled paint and forest moss distress ink. Then I watercolored the dream catcher on a piece of watercolor cardstock and used a circle die to cut out the center. Next I flipped over this piece and adhered a piece of acetate and used foam adhesive to line along the die cut shaker window. Next I inked the center on another piece of cardstock, stamped the sentiment in it's center, put some colorful sequins, gems and microbeads on top and closed the previously created shaker window. Then I adhered thin strips of black cardstock on both sides and glued it to the card base. I adhered few gemstones on the featheres to add finishing touch.
20181004_154005
20181004_154047
I have used Folk Musicians and Mandala Stencil for my fourth and last card.
20181004_154325
I used the Mandala Stencil along with shades of blue ink to create the design in the corner. Then I used black ink along with Folk Musicians stencil to ink up the musician on the right side of the card. Next I used a gold pen to create designs and to highlight certain parts of the musician and mandala design. Then I added few gemstones to add finishing touches.
20181004_154335
20181004_154424

Hope you like these cards...

Thank you for visiting today... :)
Nupur